Remember Aries Lima, A Great Bravery Sailor

发表于2011年02月12日由kengawk
瓦良格的传说：瓦舰建造、归国、改装的历程 

On 6 November, Aries Lima (reported as both Dutch and Portuguese), a sailor from the tug Haliva Champion, died after a fall while attempting to reattach the tow lines.

11月3日，由6艘拖船拖曳的“瓦良格”号航母在爱琴海斯基罗斯岛附近的国际海域遭遇前所未有的风暴，它与拖船连接的拖缆在9级大风中相继被拉断。 这个庞然大物就像一匹脱缰的野马，在海上失去了控制，横冲直撞。“瓦良格”号脱离拖船之后漂向埃维亚岛，距该岛岸边只有80公里。

不过，希腊商业海运部表示，这艘航母并无沉没或搁浅的危险。救援人员竭尽全力拯救，花费很长时间，基本控制了船只。一架希腊救援直升机在航母甲板上 着陆，把船上的七名船员，包括三名俄罗斯船员、三名乌克兰船员和一名菲律宾船员送到雅典以西的一个军用机场。经体检，医生证明他们情况良好。11月6日， 拖船号上的水手Aries Lima在试图固定拖缆时殉职。11月7日，3艘拖船和1艘希腊船只用拖缆固定住“瓦良格”号，最终将其控制住。

发表在 diary | 留下评论

谈论 长跑

发表于2010年11月20日由kengawk

 

引用

长跑

    昨晚去健身房，边看游泳比赛边跑，不知不觉在50分钟跑了7200米，还不觉得累
    以前体育课唯一怕的项目就是长跑，没想到现在已经奔着1万米去了，啦啦啦
    不怕它就容易实现它，明白很久的道理现在才亲身体会到，迟钝迟钝

I used to indulge myself into jogging in the main gym,because the pleasure is the delight of trying to approach the target,showing your willingness and energetic, and being at peace with moving only.

 
 

发表在 未分类 | 留下评论

Hello world！

发表于2010年11月20日由kengawk

Welcome to WordPress.com. This is your first post. Edit or delete it and start blogging!

发表在 未分类 | 一条评论

纪念一只很牛的白猫

发表于2010年10月7日由kengawk
发表在 diary | 留下评论

The deadline to submit abstracts for the 2011 Joint Rail Conference (JRC) has been extended to 17 October 2010.

发表于2010年10月4日由kengawk
The deadline to
submit abstracts for the 2011 Joint Rail Conference (JRC) has been
extended to 17 October 2010.

We encourage you to circulate this message and
the attached pdf file, "JRC 2011 Call for Papers &
Presentations" within your organizations and to any others
who may be interested.  Thanks very much to all of you who have
already submitted an abstract to JRC 2011.  The abstract review
process will begin shortly after 17 October.

JRC 2011 is a cooperative effort of ASME,
ASCE, IEEE, AREMA, APTA and TRB, and is intended to be international
in scope.  Given its focus and timing, it will be particularly
worthwhile for those interested in the development of new passenger
rail initiatives in North America, but there will also be significant
focus on all aspects of freight and commuter rail engineering and
transportation topics (see below).  The organizers encourage you
and your colleagues to submit abstracts.  There will also be an
opportunity for those who are interested to publish papers in the JRC
2011 Proceedings.

If you are interested in exhibit and
sponsorship opportunities, see below for contact
information.

We look forward to hearing from
you.

Sincerely,

JRC 2011 Program
Planning Committee


CALL FOR
PAPERS & PRESENTATIONS
Joint Rail
Conference – 2011
*** SHARED CORRIDORS, SHARED
INTERESTS ***

Co-Sponsors:
ASME, IEEE, ASCE, APTA, AREMA & TRB

Pueblo
Convention Center
Pueblo,
Colorado, USA
March 16 – 18,
2011
(This year the Joint
Rail Conference will be held immediately following the AAR Annual
Research Review)

For more
information about JRC 2011 go to:
http://www.asmeconferences.org/JRC2011/

JRC
2011 will be the
major, multidisciplinary North American railroad conference
encompassing all aspects of rail transportation and engineering
research.  The conference is a cooperative effort of the six
co-sponsoring organizations and will be held March 16-18, 2011 at the
Pueblo Convention Center in Pueblo, Colorado, 115 miles, (184 km)
south of Denver.

Abstracts Due 17
October 2010
To submit abstracts go
to:

Papers and presentations are
being solicited on railroad civil, mechanical, electrical, and systems
engineering, as well as safety, planning, design, operations,
maintenance, and management.  The JRC 2011 theme is, "Shared Corridors,
Shared Interests" and will cover freight and passenger rail,
encompassing commuter, regional and intercity
systems. 

Topics we are
encouraging submissions on include, but are not limited
to:

Railroad
Infrastructure Engineering
Track systems and components,
railbed substructure engineering, bridge engineering, electrical
network, and best maintenance practices

Rail Equipment
Engineering
Track systems and components,
railbed substructure engineering, bridge engineering, electrical
network, and best maintenance practices

Signal &
Train Control Engineering
Systems integration, track and
wayside components, equipment components, positive train control,
interoperability, and microprocessor control

Service Quality &
Operations Research
Service availability,
capacity, reliability, passenger communication, information systems,
transport mode integration, and fare collection

Planning and
Development
Project management, planning &
financing, new start and expansion development, service planning,
environmental impact, and workforce development.

Safety and
Security
System safety, risk analysis,
accident avoidance, accident mitigation, human factors, hazmat
handling, emergency management, and security

Abstract deadline
extended to 17 October 2010
To submit an abstract go
to: http://www.asmeconferences.org/JRC2011/

Sponsorship and
exhibit opportunities
For more information contact
Steven Dedmon, (717) 242-4972 at:
mailto:sdedmon@standardsteel.com

Receive more
information about JRC 2011
To be placed on the mailing
list to receive further information about JRC 2011, send an e-mail to
Steve Dedmon at:
mailto:sdedmon@standardsteel.com with the subject JRC Info. Please include your Name,
Affiliation and E-mail address.
发表在 conference | 留下评论

第一届铁道工程关键技术国际学术会议圆满成功

发表于2010年08月24日由kengawk
第一届铁道工程关键技术国际学术会议圆满成功

作者：白雁、沈宇鹏
来源：土建学院
发布日期：2010-8-23 10:23:00
点击量：841

LOCAL时讯

2010年8月20日至22日，由我校主办的第一届铁道工程关键技术国际学术会议（International Conference on Railway Engineering）在京召开。我校李学伟副校长代表学校出席开幕式并预祝会议圆满成功，大会主席陈峰副校长致欢迎词。对外联络合作处、科学技术处、宣传部等五个部门以及土建学院的领导老师参加了会议。来自美国、俄罗斯、德国、日本、澳大利亚、南非等多个国家和香港、台湾地区的200多位专家学者齐聚一堂，共同探讨了高速、重载铁路和城市轨道交通领域的核心关键技术。

 

 

本次会议共收到中英文论文500多篇，经学术委员会审核的300余篇优秀论文已由中国铁道出版社结集出版。大会包括主题发言、按会议主题分组讨论和邀请报告以及参观京沪高速铁路施工现场三个环节。与会专家学者分别从规划设计、轨道结构、路基工程、轨道交通综合新技术和桥梁与隧道新技术等五个议题展开讨论与交流，中国工程院院士、北京交通大学城市轨道交通研究中心所主任施仲衡（大会名誉主席）表示，当前是我国高速、重载和城市轨道交通飞速发展的关键时期，要解决目前存在的一系列问题规划是基础，设计是关键，同时要大力鼓励科技人员的科技创新。

 

 

国
内铁道工程知名专家、中央组织部专家库专家赵国堂（大会副主席）作了题为《京沪高度铁路无砟轨道规模化应用技术》的主题报告，重点讲解了京沪高速铁路修建
中所面临的特殊问题以及解决方案。国家勘察设计大师、铁四院总工程师王玉泽，从宏观角度分析了我国长江三角洲地区城际铁路线网的规划研究。美国伊利诺伊大
学厄巴纳－香槟分校铁路交通运输中心主任Christopher P.L.Barkan以《美国发展高速客运铁路发展的技术挑战》为题，介绍了美国发展高速客运铁路的初步规划和面临的问题。

 

经过学术委员会讨论决定，共从5个分会场中评选出10篇优秀论文，来自北京交通大学、武汉理工大学和澳大利亚昆士兰大学的10名学生获此殊荣。

 

 

第一届铁道工程关键技术国际学术会议的成功召开，在展示本领域的最新国际科研成果的同时，扩大了我校的国际影响，提升了我校铁道工程学科在国际同行的知名度，为与国际著名专家学者的交流与合作打下良好的基础，也为我校成为国内一流、国际知名院校发挥了积极作用。

 

 

参观中铁六局平谷板厂，了解高速铁路无砟轨道板制作过程

 
发表在 conference | 留下评论

info

发表于2010年08月17日由kengawk
ICRS2010 and ICMMA2011 Call for Paper

 

2010 International Conference on Remote Sensing (ICRS 2010) EI Compendex and ISTP

2010年国际遥感大会（ICRS 2010）EI&ISTP检索

Hangzhou, China, October 5-6,2010

中国·杭州，2010年10月5日~6日

Website会议网站： http://www.grs-association.org/icrs2010/

 

The
objective of ICRS 2010 is to provide a forum for researchers,
educators, engineers, and government officials involved in the general
areas of on Remote Sensing .

All Accepted Papers will be published by IEEE , Which will be indexed by EI Compendex and ISTP.

所有被本次会议由IEEE出版，凡被大会录用的文章都将被EI和ISTP收录。

 

ICRS 2010 has enter IEEE Conference Search：http://www.ieee.org/conferences_events/index.html

ICRS 2010 已进入IEEE会议列表，查询链接：http://www.ieee.org/conferences_events/index.html

本会议已进入维普资讯和科学网会议列表：

http://expo.cqvip.com/meet_detail.asp?id=143

http://meeting.sciencenet.cn/cinfo.aspx?cid=657

 

TOPICS：

Submissions of papers describing original work in, but not limited to, the following topics are enthusiastically encouraged.

• Satellite Remote Sensing System

• Airborne Remote Sensing System

• UAV/UAS Remote Sensing System

• Hyperspectral Sensing

• Microwave Sensors/SAR / InSAR/ D-InSAR

• Laser Sensors/LIDAR

• Digital Camera

• Global Change

• Water Quality & Water Resources

• Agriculture & Soil

• Vegetation & Crops

• Forest Resources

• Ecology, Environment & Carbon Cycle

• Land Use/Land Cover

• Geology / Geography/Geomorphology

• Geo-hazards/Disasters

• Mountain Environment and Mapping

• Coastal Zone Monitoring

• Atmosphere/Oceanography

• Archaeology

• Urban Change/Monitoring

• High Resolution Satellite Mapping

• Algorithm and Modeling

• DEM/3D Generation

• Change Detection

• Feature Extraction

• Automatic /Intelligent Classification

• Hyperspectral/SAR Data Processing

• High Resolution Data Processing

• Data Fusion and Data Minin

• Spatial Database

• GIS Decision Support and Models

• Visualization /VR

• GIS Application in Resource Management

• GPS & Photogrammetry

• Global Satellite Navigational Systems

• GPS Application

• Web GIS / Mobile Mapping

• RS/ GIS/ GPS Integrated and Applications

• Digital Photogrammetry

• Geospatial Technology for Energy, Health, Pollution, etc

• Digital Earth

• Space Environment / Deep Space Exploration

• Education & Training

 

è       投稿要求：中英文稿件均可，但是中文稿件必须同时有中英文题目、中英文摘要和中英文参考文献。（具体格式模板见附件）

Paper Format is in the attachment.

 

è       Submission system is open! http://www.easychair.org/conferences/?conf=icrs2010

投稿系统： http://www.easychair.org/conferences/?conf=icrs2010

 

è       Submission Date: September 15, 2010

截稿时间： 2010年9月15日

 

Contact: icrs2010reg@gmail.com   Miss Li:  (86)18802716682   Miss Jia:  (86)18802710080

QQ咨询群：118120329

 

 

2011 International Conference on Materials, Mechatronics and Automation (ICMMA 2011) EI Compendex

2011 年材料、机电一体化、自动化国际学术研讨会(EI 检索)

Australia, Melbourne, 15-16 January, 2011

2011年1月15-16日，澳大利亚·墨尔本

Website会议网站：http://www.ieee-peits.cn/icmma2011

 

ICMMA 2011 will be published by Key Engineering Materials Journal, which will be indexed by EI Compendex.

我们将出版400 篇在 Key Engineering Materials 期刊，先投先审先录用原则，录用了400 篇就不再接收论文。

 

本会议已进入维普资讯、中国知网CNKI及科学网会议列表：

http://expo.cqvip.com/meet_detail.asp?id=142

http://icmma2011.conf.cnki.net/WebSite/index.aspx?conferenceID=13af5545-3ed3-4d4b-819f-02c4b6abc3b5

http://meeting.sciencenet.cn/cinfo.aspx?cid=651

 

Key Engineering Materials Indexed by Elsevier: SCOPUS www.scopus.com and Ei Compendex (CPX) www.ei.org/. Cambridge Scientific Abstracts (CSA) www.csa.com, Chemical Abstracts (CA) www.cas.org, Google and Google Scholar google.com, ISI (ISTP, CPCI, Web of Science) www.isinet.com, Institution of Electrical Engineers (IEE) www.iee.org, etc.

 

ICMMA 2011 invites authors to submit original and unpublished work. Papers should not exceed 6 pages of
text using Word Template. All submitted papers (in PDF) should be
written in English. Each paper will be reviewed by 2-3 reviewers.
Submission implies the willingness of at least one of the authors to
register the work.

 

Topics:

The topics of interest include, but not limited to the following:

l            Intelligent
mechatronics, robotics, biomimetics, automation, control
systems,opto-electronic elements and Materials, laser technology and
laser processing

l            Elements, structures, mechanisms, and applications of micro and nano systems

l            Teleoperation, telerobotics, haptics, and teleoperated semi-autonomous systems

l            Sensor design, multi-sensor data fusion algorithms and wireless sensor

l            networks

l            Biomedical and rehabilitation engineering, prosthetics and artificial organs

l            Control system modeling and simulation techniques and methodologies

l            AI, intelligent control, neuro-control, fuzzy control and their applications

l            Industrial automation, process control, manufacturing process and automation.

 

è       Paper Submission System 投稿系统:

http://www.easychair.org/conferences/?conf=icmma2011

Paper Format See 格式模板见: http://www.ieee-peits.cn/icmma2011/

 

è       Important Date: September 1, 2010, Full papers and organized session proposals  

截稿时间：2010年9月1日截稿

 

è       Contact: icmma2010reg@gmail.com   Miss Li:  (86)18802716682   Miss Jia:  (86) 18802710080

QQ咨询群：121101079

注意：ICMMA2011仅接收英文投稿

 

IITA学会（主办单位）检索情况见：http://blog.sina.com.cn/iitaconference2009

 

发表在 conference | 留下评论

EduPro

发表于2010年08月14日由kengawk


EduPro Products

http://www.proshake.com/

EduPro Civil Systems, Inc. develops
powerful, but easy-to-use, computer programs for civil engineering applications.
All EduPro software products are developed in both educational and professional
versions. Our current software products include:

  • ProShake

    A powerful, user-friendly program for
    one-dimensional, equivalent linear ground response analysis.  ProShake
    is currently being used by more than 200 of the world’s top consulting firms
    and research institutions. Download a copy of the ProShake
    Users Manual     or, for a hands-on demonstration of ProShake’s
    interface and capabilities, download
    a free copy of EduShake.

  • EduShake

    A free program for one-dimensional,
    equivalent linear ground response analysis. EduShake is equivalent to ProShake,
    but is restricted to the use of only six different input motions, all of
    which are included with the program. Free copies of EduShake can be downloaded
    by visiting our download area.

发表在 计算机与 Internet | 留下评论

Advanced Nonlinear Analysis & Earthquake Engineering Software

发表于2010年08月14日由kengawk

Advanced Nonlinear Analysis & Earthquake Engineering Software

Novel Structural (nvStructural) is the Advanced Nonlinear
Structural Analysis and Earthquake Engineering software. With its
user-friendly interface, you can model complex structures in just
minutes and get the analysis results and structural response you want to
inspect, quickly and easily. Structural simulation had never been this
easy!

Novel Structural uses OpenSees
as its analysis engine. OpenSees (The Open System for Earthquake
Engineering Simulation) is a software framework for simulating the
seismic response of structural and geotechnical systems and it is
primarily developed and maintained by PEER (Pacific Earthquake Engineering Research Center) at University of California, Berkeley. OpenSees is actively used in Structural and Earthquake Engineering research projects all around the world.

Novel Structural can either be used as a fully integrated
Structural Analysis and Earthquake Engineering software or it can be
used as a GUI (Graphical User Interface) for OpenSees.

Download and test the trial version of Novel Structural in our downloads section.

See some screenshots of Novel Structural in our gallery.

Modeling/User Interface Features

  • Hardware accelerated modern 2D and 3D display utilizing latest graphics hardware features
  • 2D and 3D Edit and View modes
  • Drawing on XY, YZ and XZ planes in 2D. Drawing on any plane in 3D
  • Advanced selection options, selection of poly-line intersections, selection filters
  • Object sub-division
  • Export to OpenSees input file
  • Imperial or Metric Unit System
  • Model Explorer tree view for quick model property editing
  • Deformed shape display and animation
  • Mode shape display and time history animation
  • Joint reaction, force diagram displays
  • Displacement and stress contours
  • Element Response plots
  • Zoom, pan, navigation options
  • Quick object info display on mouse hover
  • Built-in Model generation templates
  • And more…

Analysis Features

  • Linear and Nonlinear Structure Models
  • Dead Load Analysis
  • Pushover Analysis
  • Cyclic Pushover Analysis
  • Time-history Analysis
  • P-Delta Effects
  • Uniform-support excitation
  • Multi-support excitation
  • Rayleigh Damping
  • Nonlinear geometry, nonlinear materials
  • Uniaxial materials: Elastic material, Elastic No-tension
    material, Elastic Perfectly Plastic material, Elastic Perfectly Plastic
    Gap material, Zero Tensile Strength Concrete material, Linear Tension
    Softening Concrete material, Nonlinear Tension Softening Concrete
    material, Steel01 material, Steel02 material – Giuffr�-Menegotto-Pinto
    Model with Isotropic Strain Hardening, Hardening material, Hysteretic
    material, Parallel material, Series material
  • Multi-dimensional materials: Elastic Isotropic material, Plane Stress material, Plate Fiber material
  • Zero length elements: springs, isolators
  • Line elements: Elastic Beam Column element, Nonlinear Beam
    Column element, Beam With Hinges Element, Displacement Based Beam Column
    Element, Truss elements
  • Quad elements: ShellMITC4 element
  • Solid elements: Standard Brick element, Bbar Brick element
  • Rigid Diaphragms, Equal DOF Constraints
  • Rigid Links
  • Line end releases, end offsets
  • Nodal load, displacement application
  • Line distributed and point load application
  • Load patterns, time series, ground motions, analysis cases
  • Static, dynamic, transient, variable-transient analysis types
  • Eigen value analysis
  • Solution algorithm options: Linear, Newton, Newton with line search, Modified Newton, Krylov-Newton, BFGS, Broyden
  • Solver options: Profile Symmetric Positive Definite, Banded
    Symmetric Positive Definite, Sparse Symmetric Positive Definite, Banded
    General, Sparse General, UMFPACK
  • And more…
发表在 计算机与 Internet | 留下评论

粤港大桥交叉螺旋设计案 解决左右驾驶问题(图)

发表于2010年08月13日由kengawk

粤港大桥交叉螺旋设计案 解决左右驾驶问题(图)
荷兰NL建筑设计公司的杰作，不过建设这样的桥梁需要轻质材料

从大陆方向过来的车道将会在香港方向的车道下完成交叉

大陆方向过来的车道将会在香港方向的车道下完成交叉

　　荷兰公司粤港大桥设计方案 解决左右驾驶问题(组图)

   
国际在线专稿：近日，荷兰NL建筑设计公司推出了他们的粤港大桥设计杰作，该桥梁是为连接中国香港和大陆量身打造的。大桥主体是交叉螺旋的造型，如同一串
珍珠横跨江面，这样设计是为了调整大陆和香港不同的交通行驶习惯：香港人靠左行驶，而大陆则是靠右行驶。通过这样的大桥，驾驶者不用变换车道，沿着道路行
驶即可。

　　不过，如此复杂的设计需要采用轻质材料建设桥梁。以上是《世界报》发布的一组该桥梁的设计图。

发表在 Art of Building | 留下评论